Just a reminder to those who haven't heard, there's a discount for early registration. Head to our registration page by June 10th to snag our Early Bird discount off the already-reasonable fee. Check here for more information on the conference particulars as well as what other fantastic sessions await you on July 17th!
Showing posts with label book mending. Show all posts
Showing posts with label book mending. Show all posts
Thursday, May 26, 2016
And Basic Book Repair for Libraries is... Filled!
Just a reminder to those who haven't heard, there's a discount for early registration. Head to our registration page by June 10th to snag our Early Bird discount off the already-reasonable fee. Check here for more information on the conference particulars as well as what other fantastic sessions await you on July 17th!
Sunday, June 21, 2015
Book Repair Roadshow: Port Orford, Oregon
"Basic Book Repair for Libraries" took the show on the road last week from Portland State University Library to the Port Orford Public Library. It's been a few years since Kris Kern and I roamed the state with a car full of mending tools, polyvinyl acetate, acid-free paper, and Kennett bookcloth. The workshop has been going steady at both the OLA pre-conference in the spring and the Support Staff Division conference in the summer, and both Kris and I have been teaching in different library education programs. But it had been a while since the book repair caravan rolled out of the Willamette Valley!
Librarians and staff from Curry and Coos Counties, from Brookings to Coos Bay, from Gold Beach to Agness, met in Port Orford on June 19 for a day of book conservation, starting with the basics of bookbinding adhesive and the properties of paper, and working our way up to a full spine repair and the wonderful "one on, two off" hollow tube that rejoins text blocks to their cases.
I always learn something about book care myself in every class. Coming from a library that does not generally preserve dust jackets for hardcovers, I'll mention the great difference dust jackets, protected by mylar covers, can make to the life of a well-read hardcover. While my big job at the repair table is spine replacement of hardcovers, most of the books folks brought along were still intact on the outside, thanks to their dust jackets. The trouble was split bindings and pages falling out! Most of the time, bindings of adhesive-bound hardcovers bust because the adhesive holding them together just wasn't so good in the first place, but some strain is also placed on bindings from dust jackets that are attached very tightly to their covers. A little "ease" is recommended when taping jackets on, to ease stress on the spine!
Many thanks to all who came out to spend the day with me fixing books on the southern coast! And especial thanks to the directors of the Curry and the Port Orford Public Libraries who invited me to travel south, made my journey possible, and gave the workshop a perfect space, and to Rea Andrew with the Support Staff Division who put together our toolkits.
Happy Summer Solstice, and I look forward to seeing everyone at the workshop at the SSD Conference at Newport in about a month. More time by the sea? Yes please!
![]() |
Coquille Point, Bandon, Oregon. June 19, 2015 |
Monday, March 9, 2015
Five book mending tutorials
It's not updated anymore, but explore the blog of One Book at a Time to find some tutorials, mostly of techniques you can use at home, to repair and restore books.
Andria Bobo has a really nice pinterest collection of book repair tutorials. Fair warning, though, pinterest will put all sorts of blocks over the page which reduces the area you can see - unless you have an account.
A school for conservation called West Dean is a beautiful blog even if you have no interest in conservation or book repair, and there are some very good in depth tutorials with detailed photos. There's a tutorial on Japanese stab binding illustrated with a sandwich!
There are some good tutorials over at Temper Products, who are a company that make book binding furniture.
The NorthEast Document Conservation Center has a lot of free preservation resources online, made possible in part by support from the National Endowment for the Humanities.
Monday, November 10, 2014
Ancient book repair techniques
![]() |
Bamberg, Staatsbibliothek, Msc.Patr.41, fol. 69r. Detail. |
Monday, November 3, 2014
Library Book Mending Resources
Association for Library Collections & Technical Services webinar
This is a FREE webinar originally presented on 9/14/11 by Peter D. Verheyen and Marianne Hanley.
"Participants will become familiar with several types of basic repairs for bound circulating collections materials in school, public, and academic libraries. Tip-ins and basic page repairs, hinge tightening, and a variety of spine repairs are covered. Techniques are illustrated and demonstrated with text, images, and video. Links to other resources are provided. Repairs and conservation treatments on rare and special collections materials are NOT discussed."
Simple Techniques for the Maintenance and Repair of Books This is an online manual from Gaylord called Bookcraft, which they've published since 1924. This version is copyrighted 1996. In it they cover typical repairs of both the textblock and covers, and talk about cleaning and maintenance.
Tippacanoe County Public Library Book Care and Repair
TCPL has collected a good list of a variety of internet resources on book repairs. They have separated out the list into Specific Situations & Repairs, General Book Care, and Equipment and Supplies. They also recommend the Syracuse University Library's youtube channel, which is the next link in this list.
Syracuse University Library Preservation's youtube channel
There are video tutorials about repairs, as well as about books in general and some longer lectures.
Demco Madison's youtube channel
This is a playlist that includes 12 videos from Demco that details simple repairs such as repairing damaged pages, hinges, covers and spines.
Conservation Book Repair: A training manual by Artemis BonaDea
A book repair manual published by Alaska State Library which is downloadable as a whole or chapter by chapter for free. It is a culmination of presentation methods and handouts developed in workshops given by Artemis BonaDea.
Simple Book Repair Manual
A completely web-based book about mending and repair, the table of contents is a pull-down menu which takes you to each chapter topic. There is no download time and it's completely free.
"The web version of the Simple Book Repair Manual was created by members of Preservation Services, Dartmouth College Library. "
Do you have any favorite online book repair resources? Let us know in the comments below.
Monday, March 24, 2014
SSD sponsored Book Mending Session at 2014 OLA Conference
Here's a little more information from Carolee on the book mending session being presented at the OLA Conference this year:
ANNOUNCING: The OLA Support Staff Division and the Library Preservation Round Table will present an all-day Basic Book Mending Pre-Conference workshop on Wednesday, April 16, 2014, at the Oregon Library Association Conference in Salem. Help refresh worn books and add years to their circulating lives!
This workshop will introduce basic book repair methods and materials through hands-on instruction and is intended for beginners. Procedures covered will include reattaching loose pages, cover repair and reattachment, hinge and spine repair. Please note that procedures in this class are intended for circulating collections and not for rare or valuable books and documents.
We will also discuss collection maintenance and strategies for avoiding damage and streamlining conservation processes. The materials fee for the workshop provides a mending toolkit which participants may take home; paper, bookcloth, and adhesives will be provided. Participants are encouraged, but not required, to bring their own books to work on.
Presented by Carolee Harrison (Special Collections and Archives Technician) and Kristen Kern (Fine and Performing Arts Librarian), Portland State University Library.
MORE INFORMATION about the pre-conference and general conference: http://www.olaweb.org/ola-conference-2014
REGISTRATION and rate information: https://ola.memberclicks.net/index.php?option=com_mc&view=mc&mcid=form_148528
Image courtesy of adamr / FreeDigitalPhotos.net
![]() |
Condition check: is your library's print collection looking... "loved"? |
This workshop will introduce basic book repair methods and materials through hands-on instruction and is intended for beginners. Procedures covered will include reattaching loose pages, cover repair and reattachment, hinge and spine repair. Please note that procedures in this class are intended for circulating collections and not for rare or valuable books and documents.
We will also discuss collection maintenance and strategies for avoiding damage and streamlining conservation processes. The materials fee for the workshop provides a mending toolkit which participants may take home; paper, bookcloth, and adhesives will be provided. Participants are encouraged, but not required, to bring their own books to work on.
Presented by Carolee Harrison (Special Collections and Archives Technician) and Kristen Kern (Fine and Performing Arts Librarian), Portland State University Library.
MORE INFORMATION about the pre-conference and general conference: http://www.olaweb.org/ola-conference-2014
REGISTRATION and rate information: https://ola.memberclicks.net/index.php?option=com_mc&view=mc&mcid=form_148528
Image courtesy of adamr / FreeDigitalPhotos.net
Friday, June 8, 2012
Fix-it Friday : Tip-In Tips
This week's Fix-it Friday presents one of the simplest and quickest book repairs -- tipping in loose pages -- with some tricks for making it even simpler!
Friday, May 11, 2012
Fix-it Friday (Repair Manual Edition) : "One On, Two Off" Hollow Tube Recase
Welcome back to Fix-It Friday! Today's post presents an illustrated guide to recasing a hardcover book using a single piece of paper and some PVA. This procedure may be old hat to some of you who are already repairing books in your collection, but it is so useful (and simple) that I hoped it'd be worth sharing again.
This repair reattaches a hardcover case to a text block without replacing the endsheets and super. A strip of paper, folded thrice, is used to rejoin the text block and case at the spine without losing the important open "tube" along the spine. "One on, two off" refers to the three sides of the folded paper -- in this version of the repair, one of the three folds will be glued onto the spine of the text block, while the other two will be off the text block and glued to the spine inlay of the case.
If it sounds complicated so far, fear not! Let's look at what we're dealing with and gather the tools we'll need.
This repair reattaches a hardcover case to a text block without replacing the endsheets and super. A strip of paper, folded thrice, is used to rejoin the text block and case at the spine without losing the important open "tube" along the spine. "One on, two off" refers to the three sides of the folded paper -- in this version of the repair, one of the three folds will be glued onto the spine of the text block, while the other two will be off the text block and glued to the spine inlay of the case.
If it sounds complicated so far, fear not! Let's look at what we're dealing with and gather the tools we'll need.
Friday, April 13, 2012
Fix-It Friday : Be Square
This month's Fix-It Friday book mending topic is short and sweet: some quick ways to get straight, square measurements without taking down a lot of numbers.
First of all, it's useful to know how wide your regular metal ruler is, and to use a cutting mat that has grid lines printed on it. You can use the width of the ruler as well as its length as a measuring tool, and the paper or stock you are cutting can be placed square on the grid on the cutting mat to ensure a straight cut.
A trick I learned recently was to install a jig onto the cutting mat that can be used to jog up paper and hold it true and straight while cutting or folding. Such a jig can be made easily with a piece of thick, stiff board (here, a strip of Davey book cover board), attached with strips of double-backed tape.
First of all, it's useful to know how wide your regular metal ruler is, and to use a cutting mat that has grid lines printed on it. You can use the width of the ruler as well as its length as a measuring tool, and the paper or stock you are cutting can be placed square on the grid on the cutting mat to ensure a straight cut.
A trick I learned recently was to install a jig onto the cutting mat that can be used to jog up paper and hold it true and straight while cutting or folding. Such a jig can be made easily with a piece of thick, stiff board (here, a strip of Davey book cover board), attached with strips of double-backed tape.
Friday, March 9, 2012
Fix-it Friday : Using Methyl Cellulose in Bookbinding and Book Repair
Welcome to Fix-It Friday -- a monthly series that proposes to bring you a bit of news you can use to help repair and conserve books! This month, some information on a very useful bookbinding adhesive that can make book repair a kinder, gentler process for books and for you: methyl cellulose.
Methyl cellulose is a chemical compound derived from cellulose. When mixed with water, it can be used as a low-tack adhesive that is often added to PVA in bookbinding. The addition of methyl cellulose to PVA slows the drying time of PVA without compromising its strength.
Application of straight methyl cellulose to previously glued materials can also help break down and loosen old adhesive. It is used to clean old paper linings, adhesive, and super cloth from spines when preparing books for hollow tubes and rebacking.
Methyl cellulose is a chemical compound derived from cellulose. When mixed with water, it can be used as a low-tack adhesive that is often added to PVA in bookbinding. The addition of methyl cellulose to PVA slows the drying time of PVA without compromising its strength.
Application of straight methyl cellulose to previously glued materials can also help break down and loosen old adhesive. It is used to clean old paper linings, adhesive, and super cloth from spines when preparing books for hollow tubes and rebacking.
Wednesday, February 15, 2012
Kyle Wrappers - Wrap books without using fasteners!
We're so excited to introduce Carolee Harrison, Conservation Technician with Portland State University. She has taught the all-day Basic Book Repair for Libraries at several of our Support Staff Division Conferences. This is the first post in what we hope will be a continuing series.
The “Kyle Wrapper” is named for its inventor, conservator and book artist Hedi Kyle. The design is similar to a phase box, with two pieces of thin board wrapped around the book perpendicular to one another, but here the inner wrapper tucks into the outer wrapper, and the container holds itself closed without the need of ties, magnets or Velcro.
You’ll need:
- Two pieces of Bristol board or cover stock, long enough to wrap around the book horizontally and vertically
- A ruler / straightedge
- An x-acto knife or scalpel
- A bone folder
- A jig made of stiff board and/or a triangle
- A little bit of PVA
Monday, December 7, 2009
Book Mending Tip of the Month
This month I will show you a fast and easy way to mend books with ragged edges. You can use this method for the edges of the book or the sides.
The book I have here has both corners and sides needing some touching up.




With the sides, just brush them lightly with glue and again pinch material together trying to make the cover ends meet, as much as you can.
When the glue is dry, the corner(s) and/or side(s) become hard. This will reinforce these areas.
Give it a try, the more you do it the better you will be.
The book I have here has both corners and sides needing some touching up.
Lifting the cover up, you will find the board is made up of several layers of paper. Run your thump up as if you are flipping pages in a book. As you do that, take your paint brush with some glue on it and feather it back and forth brushing in between the pages.
Now lay your brush down, working with both hands, pinch the corner ends together also working the cover trying to make the material come together.
With the sides, just brush them lightly with glue and again pinch material together trying to make the cover ends meet, as much as you can.
When the glue is dry, the corner(s) and/or side(s) become hard. This will reinforce these areas.
Give it a try, the more you do it the better you will be.
Wednesday, November 4, 2009
Book Mending Hands
Sometimes while mending a book, you need an extra set of hands, try this...

Using 3/4 inch ply, cut 2 boards about 10 1/2 inches high by 15 inches wide. Cut another piece, 2 1/2 to 3 inches high by 15 inches wide. Buy 4, angle brackets about 1 x 1 1/2. Buy 2 eye bolts, (1/4 by 6) and 2 wing nuts.

Drill 1/4 holes on the left and right sides of one of the 10 1/2 by 15 inch piece of board about every 1 1/2 to 2 inches the full length of the board and 1 hole in the middle on each side of the 2 1/2 to 3 by 15 piece. You will use these holes for the eye bolts. Now place and screw the angle bracket at each end of the board and on both sides, creating a support foot. Taking the remaining piece and laying it down flat, place the board with the holes and brackets on top and center it. Now screw the angle brackets to this piece.

Placing the eye bolts thru the large piece and thru the smaller one, (as shown) you can adjust the thickness of the homemade vise and the height. Just unscrew the bolts and place it in the appropriate hole for the height of the book.

Your finished product....

Using 3/4 inch ply, cut 2 boards about 10 1/2 inches high by 15 inches wide. Cut another piece, 2 1/2 to 3 inches high by 15 inches wide. Buy 4, angle brackets about 1 x 1 1/2. Buy 2 eye bolts, (1/4 by 6) and 2 wing nuts.

Drill 1/4 holes on the left and right sides of one of the 10 1/2 by 15 inch piece of board about every 1 1/2 to 2 inches the full length of the board and 1 hole in the middle on each side of the 2 1/2 to 3 by 15 piece. You will use these holes for the eye bolts. Now place and screw the angle bracket at each end of the board and on both sides, creating a support foot. Taking the remaining piece and laying it down flat, place the board with the holes and brackets on top and center it. Now screw the angle brackets to this piece.

Placing the eye bolts thru the large piece and thru the smaller one, (as shown) you can adjust the thickness of the homemade vise and the height. Just unscrew the bolts and place it in the appropriate hole for the height of the book.

Your finished product....
Tuesday, October 6, 2009
On the Road with Diane and Susan
The cast:
Susan Gilmont (SSD Chair)
Diane Bolen (SSD Continuing Education Chair)
Me (Jey Wann, SSD past-past Chair)
The mission:
Present information about SSD, and support staff certification, to the Eastern Oregon Library Association (EOLA) at La Grande Public Library; give a book mending workshop at La Grande Public Library.
Our story:
Distance is the theme of this trip. Diane and I both work in Salem, where libraries (and people, for that matter) are fairly thick on the ground. Susan works in Newport, which isn't as urban, but is still close to the populous Willamette Valley.
The first hour or so of our trip, on I5 and 205, was your typical, busy freeway drive. But once we turned east, distances stretched out. It was farther between cars on the road, farther between towns, and the view was dominated by the magnificant Columbia River Gorge. Since Diane was doing the driving, I'd brought a book and my mp3 player to keep from getting bored. Not necessary; we talked pretty much non-stop. Our topics of conversation ranged from library issues to pets, family issues, and where we'd like to go if we could go anywhere, any time.
We arrived at our motel in La Grande around dusk. After dinner, I retired to my room, where I worked on tweaking my presentation for the next day.
No road trip is complete without getting lost at least once. Although the library was only supposed to be a 4-minute drive from our motel, we ended up traveling 3 miles before we found it. Now Diane and Susan know never to ask me to navigate. I think I was reading the directions backwards.
We were initially a bit disappointed at the fairly low turn out at the meeting. Again, distances, plus staffing demands, had probably kept some from attending. However, the smaller group made for more informal presentation, and more discussion. I hope my case for encouraging support staff to become involved in OLA was taken to heart. There was genuine interest, but perhaps a little skepticism, in Susan's excellent presentation about support staff certification. As Susan says, skepticism is natural now, when the program hasn't started yet, and no one knows what benefits (besides learning) support staff may gain from being certified.
After lunch, I took off my SSD hat, put on my state documents hat, and visited the Pierce Library at Eastern Oregon University. I'd never visited EOU before. Although the campus is easy walking distance from downtown La Grande, its hilltop location emphasizes eastern Oregon's wide-open landscape. The document staff at EOU can be proud of their well managed and easily accessibly state and federal documents collection.
After walking back from the university (and being disciplined enough to avoid an excellent bakery), I watched Diane's book mending workshop. Again, attendance was low, but everyone participated actively, Diane did a great job, and there were lots of books to be repaired!
Distance is relative. Many of the folks we talked to were surprised that we weren't driving straight back to Salem after the book mending workshop was over. After all, they said, they drive those kinds of distances at the end of the day all the time. We'd decided to stay the night in Hermiston, despite the local opinion that it's "just down the road".
The weather in La Grande had been cloudy most of the afternoon. As we drove down the notorious Cabbage Hill, though, the view to the west was full of bright sun, illuminating the vast, rolling landscape, and emphasizing distance.
For me, the trip was a great experience. I've know Susan and Diane for years, but definitely had the opportunity to get to know them better. (Diane's got great stories about motorcycle vacations, and Susan is the only person I know who can come up with a poetic Tudor quotation about kidney stones). I'd hoped to be able to meet for east-side support staff, but the opportunity to talk informally with librarians about SSD and OLA was rewarding. Under Susan's leadership, SSD will explore providing remote networking and continuing education opportunities.
I accepted the position of chair of SSD was a little reluctance two years ago, worrying that the fact that we were "recycling" officers meant that we were losing momentum. Since then, SSD has moved ahead. There are new people with new ideas (including this blog)on the Exec Committee, and SSD continues to support library support staff. We're all working together to make Oregon libraries better, and I'm proud to have been part of the journey.
Susan Gilmont (SSD Chair)
Diane Bolen (SSD Continuing Education Chair)
Me (Jey Wann, SSD past-past Chair)
The mission:
Present information about SSD, and support staff certification, to the Eastern Oregon Library Association (EOLA) at La Grande Public Library; give a book mending workshop at La Grande Public Library.
Our story:
Distance is the theme of this trip. Diane and I both work in Salem, where libraries (and people, for that matter) are fairly thick on the ground. Susan works in Newport, which isn't as urban, but is still close to the populous Willamette Valley.
The first hour or so of our trip, on I5 and 205, was your typical, busy freeway drive. But once we turned east, distances stretched out. It was farther between cars on the road, farther between towns, and the view was dominated by the magnificant Columbia River Gorge. Since Diane was doing the driving, I'd brought a book and my mp3 player to keep from getting bored. Not necessary; we talked pretty much non-stop. Our topics of conversation ranged from library issues to pets, family issues, and where we'd like to go if we could go anywhere, any time.
We arrived at our motel in La Grande around dusk. After dinner, I retired to my room, where I worked on tweaking my presentation for the next day.
No road trip is complete without getting lost at least once. Although the library was only supposed to be a 4-minute drive from our motel, we ended up traveling 3 miles before we found it. Now Diane and Susan know never to ask me to navigate. I think I was reading the directions backwards.
We were initially a bit disappointed at the fairly low turn out at the meeting. Again, distances, plus staffing demands, had probably kept some from attending. However, the smaller group made for more informal presentation, and more discussion. I hope my case for encouraging support staff to become involved in OLA was taken to heart. There was genuine interest, but perhaps a little skepticism, in Susan's excellent presentation about support staff certification. As Susan says, skepticism is natural now, when the program hasn't started yet, and no one knows what benefits (besides learning) support staff may gain from being certified.
After lunch, I took off my SSD hat, put on my state documents hat, and visited the Pierce Library at Eastern Oregon University. I'd never visited EOU before. Although the campus is easy walking distance from downtown La Grande, its hilltop location emphasizes eastern Oregon's wide-open landscape. The document staff at EOU can be proud of their well managed and easily accessibly state and federal documents collection.

Distance is relative. Many of the folks we talked to were surprised that we weren't driving straight back to Salem after the book mending workshop was over. After all, they said, they drive those kinds of distances at the end of the day all the time. We'd decided to stay the night in Hermiston, despite the local opinion that it's "just down the road".

For me, the trip was a great experience. I've know Susan and Diane for years, but definitely had the opportunity to get to know them better. (Diane's got great stories about motorcycle vacations, and Susan is the only person I know who can come up with a poetic Tudor quotation about kidney stones). I'd hoped to be able to meet for east-side support staff, but the opportunity to talk informally with librarians about SSD and OLA was rewarding. Under Susan's leadership, SSD will explore providing remote networking and continuing education opportunities.
I accepted the position of chair of SSD was a little reluctance two years ago, worrying that the fact that we were "recycling" officers meant that we were losing momentum. Since then, SSD has moved ahead. There are new people with new ideas (including this blog)on the Exec Committee, and SSD continues to support library support staff. We're all working together to make Oregon libraries better, and I'm proud to have been part of the journey.
Tuesday, September 22, 2009
Book Repair Workshop at La Grand Public Library
SSD is sponsoring a book repair workshop at the La Grand Public Library in conjunction with the Eastern Oregon Library Association Fall meeting. The event is Friday, October 2. For more information and to register visit: http://www.olaweb.org/mc/page.do?sitePageId=61036 or contact me at cathyz@dpls.us
We will also have an SSD discussion and Q&A with Susan Gilmont, SSD Chair, and Jey Wann from 10:45-11:30. This is a free event.
We will also have an SSD discussion and Q&A with Susan Gilmont, SSD Chair, and Jey Wann from 10:45-11:30. This is a free event.
Thursday, June 4, 2009
SSD Conference Registration Now Open!!
Click here to Register!
Breakout sessions available:
Book Repair for Libraries
Note: This is an all day session and all breakout sessions must be selected for Book Repair and there is a $30.00 supply fee. The class is limited to 12 people, though there will be a waiting list for those interested.
Presenter: Carolee Harrison, Conservation Technician with Portland State University; Kris Kern, Fine and Performing Arts Librarian with Portland State University, assisted by Diane Bolen, Willamette University & SSD Continuing Education Chair. This is the first part of an all day session. Book repair for libraries: a hands-on introduction to book structure, the basics of book mending for circulating collections, and the materials used for long-lasting repairs. Techniques covered will include hinge repair, tipping in pages, spine replacement and recasing. Participants are encouraged to bring their own books to work on; however, please note that work performed in this session is not intended for rare, valuable, or extremely fragile material. The session will also include a discussion on collection maintenance and how to prevent damage to books.
Time & Space Management & Organization
Presenter: Cindy Culpovich, owner of Organizing Your Space Organizing Your Space is here to bring order to your life. Living in an organized environment enables you to be productive, successful and creative. We can help you declutter and organize your space. Our mission is to help you become more efficient, allowing you time to do the things you love and follow your dreams. Organizing is my passion. It's challenging, fun, and immensely rewarding. The best part is helping people go from a chaotic environment to a calm environment and to see the benefits in their lives!
LSSCP: Library Support Staff Certification
Presenter: Karen Strege, co-director of LSSCP. ALA may establish a certificate program for library support staff (LSS) in January 2010. This program will cover the background, current developments and requirements and leave plenty of time for questions. Karen is a co-director of the LSSCP and a private consultant with an interest in planning and evolution. Previously, Karen was the state librarian in Montana and held other positions in public and community college libraries. http://www.ala-apa.org/lsscp/index.html
Introduction to CD and DVD Cataloging
Presenter: Richard Sapon-White, Catalog Librarian, Oregon State University Libraries This workshop will cover the basics of cataloging CD s and DVD s. Using a combination of slide presentation and exercises, participants will learn the MARC fields that distinguish these popular resources. Emphasis will be placed on selecting appropriate records and correcting bibliographic data. If time permits, processing issues will also be discussed. Richard Sapon-White is currently head of cataloging at Oregon State University Libraries. He is an active member of the International Relations Round Tables of both the American Library Association and the Oregon Library Association, as well as having served on various committees of the Association of College and Research Libraries and the Association for Library Collections and Technical Services. Mr. Sapon-White has a master s in library science from Southern Connecticut State University, a second master s degree in public health from the University of California at Los Angeles, and a bachelor s degree in zoology from the University of Toronto. In 2005 he received a Fulbright Fellowship to teach cataloging at Charles University in Prague, Czech Republic.
A Day in the Life of a Library Assistant
Ever wonder what your peers around the state do all day at work? Well, now you can find out! Hear what motivates or inspires other support staff. Discover the differences between your jobs and theirs and find out which joys and challenges we all share.
Why can t we all just get along? (how to deal with difficult people)
Moderator: Jackson Stalley Have you ever found yourself bracing for a meeting or conversation? Then this session is for you! Participants will learn how to manage conflict resolution, work with emotions while developing healthy, objective work relationships and valuing differences that will help create a more productive work environment.
The Huddle: A round table forum
Moderator: Stacey Fiegi This session will afford the member the opportunity to get assistance and offer solutions for the myriad of real problems facing operations in all aspects of library services. Stacey Fiegi has been with the Klamath County Library for five years. She has worked in the Circulation Department, Reference Department and the Law Library. She has an Associate s degree in Office Systems Technology and a Bachelor s degree in Business Management Marketing. Stacey is also the mother of three children, ages 22, 20, and 18.
Breakout sessions available:
Book Repair for Libraries
Note: This is an all day session and all breakout sessions must be selected for Book Repair and there is a $30.00 supply fee. The class is limited to 12 people, though there will be a waiting list for those interested.
Presenter: Carolee Harrison, Conservation Technician with Portland State University; Kris Kern, Fine and Performing Arts Librarian with Portland State University, assisted by Diane Bolen, Willamette University & SSD Continuing Education Chair. This is the first part of an all day session. Book repair for libraries: a hands-on introduction to book structure, the basics of book mending for circulating collections, and the materials used for long-lasting repairs. Techniques covered will include hinge repair, tipping in pages, spine replacement and recasing. Participants are encouraged to bring their own books to work on; however, please note that work performed in this session is not intended for rare, valuable, or extremely fragile material. The session will also include a discussion on collection maintenance and how to prevent damage to books.
Time & Space Management & Organization
Presenter: Cindy Culpovich, owner of Organizing Your Space Organizing Your Space is here to bring order to your life. Living in an organized environment enables you to be productive, successful and creative. We can help you declutter and organize your space. Our mission is to help you become more efficient, allowing you time to do the things you love and follow your dreams. Organizing is my passion. It's challenging, fun, and immensely rewarding. The best part is helping people go from a chaotic environment to a calm environment and to see the benefits in their lives!
LSSCP: Library Support Staff Certification
Presenter: Karen Strege, co-director of LSSCP. ALA may establish a certificate program for library support staff (LSS) in January 2010. This program will cover the background, current developments and requirements and leave plenty of time for questions. Karen is a co-director of the LSSCP and a private consultant with an interest in planning and evolution. Previously, Karen was the state librarian in Montana and held other positions in public and community college libraries. http://www.ala-apa.org/lsscp/index.html
Introduction to CD and DVD Cataloging
Presenter: Richard Sapon-White, Catalog Librarian, Oregon State University Libraries This workshop will cover the basics of cataloging CD s and DVD s. Using a combination of slide presentation and exercises, participants will learn the MARC fields that distinguish these popular resources. Emphasis will be placed on selecting appropriate records and correcting bibliographic data. If time permits, processing issues will also be discussed. Richard Sapon-White is currently head of cataloging at Oregon State University Libraries. He is an active member of the International Relations Round Tables of both the American Library Association and the Oregon Library Association, as well as having served on various committees of the Association of College and Research Libraries and the Association for Library Collections and Technical Services. Mr. Sapon-White has a master s in library science from Southern Connecticut State University, a second master s degree in public health from the University of California at Los Angeles, and a bachelor s degree in zoology from the University of Toronto. In 2005 he received a Fulbright Fellowship to teach cataloging at Charles University in Prague, Czech Republic.
A Day in the Life of a Library Assistant
Ever wonder what your peers around the state do all day at work? Well, now you can find out! Hear what motivates or inspires other support staff. Discover the differences between your jobs and theirs and find out which joys and challenges we all share.
Why can t we all just get along? (how to deal with difficult people)
Moderator: Jackson Stalley Have you ever found yourself bracing for a meeting or conversation? Then this session is for you! Participants will learn how to manage conflict resolution, work with emotions while developing healthy, objective work relationships and valuing differences that will help create a more productive work environment.
The Huddle: A round table forum
Moderator: Stacey Fiegi This session will afford the member the opportunity to get assistance and offer solutions for the myriad of real problems facing operations in all aspects of library services. Stacey Fiegi has been with the Klamath County Library for five years. She has worked in the Circulation Department, Reference Department and the Law Library. She has an Associate s degree in Office Systems Technology and a Bachelor s degree in Business Management Marketing. Stacey is also the mother of three children, ages 22, 20, and 18.
Subscribe to:
Posts (Atom)